Poliéster pokok Serat Produksi Line Sajarah
- Mesin PSF diproduksi dina awal 1970-an.
- Dina 1990s tengah, urang mimiti panalungtikan sarta ngamekarkeun 100t / d garis produksi;jeung 2002, garis ieu nempatkeun kana produksi.
- Ngamekarkeun sakabeh susunan 120t / d garis produksi dina 2003.
- Ti 2005 nepi ka 2011, garis produk 150t / d ieu nempatkeun kana produksi bets.
- Dina 2012, garis produk 200t/d PSF jalan junun.
- panganyarna max.Kapasitas hiji garis: 225t/d.
- Langkung ti 200 jalur parantos suksés dijalankeun di sakumna dunya, dimana langkung ti 100 gaduh kapasitas ageung.
- Nepi ka ayeuna, tingkat serat kelas munggaran tiasa ngahontal langkung ti 98% sareng serat kelas luhur langkung ti 95%.
Prosés aliran garis spinning poliéster tina flakes botol atawa chip
Serpihan botol poliéster atanapi chip - Dipanaskeun sareng garing-hopper-Screw extruder -Saringan lebur - Spinning beam -Metering pump-Spinning packs -Quenching system-Spinning torowongan-Mesin take-up - Capstan - Mesin Traverse (kaleng serat)
Aliran Prosés Poliéster Saatos-Perlakuan Line(Jalur prosés Toyobo)
Creel - Modul Prefeed (5 rollers + 1 immersion roller) - Immersion Mandi - Immersion Roller - Draw Stand 1 ( 5 rollers + 1 immersion roller) - Draw Mandi - Draw Stand 2 (5 rollers + 1 immersion roller) - uap pemanasan Box - Draw Stand 3 (12 rollers) - Annealer (5 rollers) - Oiling Stacker - (Trio - Tension Roller) - Pre-crimper Heating Box - Crimper - Cooling Conveyor (atanapi Tow Plaiter - Dryer) - Oil Sprayer - Tension Stand - Cutter - Baler
Aliran Prosés Poliéster Saatos-Perlakuan Line (jalur prosés Fleissner)
Creel - Prefeed Module (7 gilinding) - Immersion Mandi - Draw Stand 1 ( 7 gilinding ) - Draw mandi - Draw Stand 2 (7 gilinding) - uap pemanasan Box - Annealer (18 jaket gilinding) - Cooling Sprayer - Draw Stand 3 (7 rollers) - Tow Stacker - Trio - Tension Roller - Pre-crimper Heating Box - Crimper - Tow Plaiter - Dryer - Tension Stand - Cutter - Baler
Indéks Serat (Pikeun Rujukan)
| No. | Barang | Serat Padet | Serat Pertengahan | Jenis Wol | |||||||||||||
| High-Tenacity | Biasa | ||||||||||||||||
| Pangalusna | Kelas A | mumpuni | Pangalusna | Kelas A | mumpuni | Pangalusna | Kelas A | mumpuni | Pangalusna | Kelas A | mumpuni | ||||||
| 8 | Jumlah crimp /(pc/25mm) | M2±2.5 | M2±3.5 | M2±2.5 | M2±3.5 | M2±2.5 | M2±3.5 | M2±2.5 | M2±3.5 | ||||||||
| 9 | Babandingan Crimp /% | M3 ± 2,5 | M3 ± 3,5 | M3 ± 2,5 | M3 ± 3,5 | M3 ± 2,5 | M3 ± 3,5 | M3 ± 2,5 | M3 ± 3,5 | ||||||||
| 10 | Nyusut dina 180 ℃ | M4 ± 2.0 | M4 ± 3.0 | M4 ± 2.0 | M4 ± 3.0 | M4 ± 2.0 | M4 ± 3.0 | M4 ± 2.0 | M4 ± 3.0 | ||||||||
| 11 | Résistansi spésifik /Ω*cm ≤ | M5 × 108 | M5 × 109 | M5 × 108 | M5 × 109 | M5 × 108 | M5 × 109 | M5 × 108 | M5 × 109 | ||||||||
| 12 | 10% enlongation / (CN/dtex) ≥ | 2.8 | 2.4 | 2 | —— | —— | —— | —— | —— | —— | —— | —— | —— | ||||
| 13 | Variasi kakuatan putus / ≤ | 10 | 15 | 10 | —— | —— | 13 | —— | —— | —— | —— | —— | |||||
waktos pos: Sep-05-2022